Big River Darts
Darts, Shafts, & Flights
come in SETS of THREE
Your Privacy is important to
us. We do not disclose any
personal information and/or
email addresses to anyone.
Big River Things, Inc
PO Box 553
119 Main Ave
Clinton, IA 52733
Where We are...
...a Closer Look
|All Sales Are
Final...within Reason, and/or BRD Bills, the IndustryStandard, 15% ReStocking
Fee for All Non-Defective returned merchandise.|
No Returns without Return
Prices Subject to Change
& Shafts on all
dart Sets may VARY!
are Not Toys!
Lead Warning: California health & safety
code § 25249.6 and proposition 65 are laws that were passed in the state
of California, in an effort to provide a safer environment. Lead is found on the
list. All darts made from brass have a 3% lead content. Click here
for more information. |
Deluxe Show Case
Extra Flites Tips, & Tool
Points: $135/set :: Moveable Points: $150/set
Smooth Barrel - GW1
Barrel - GW2
The manufacturing process begins with a billet of high-density tungsten.
The billet is then center-ground and shaped. The barrel design gives
you the best of both worlds... A slightly front-weighted dart for
increased accuracy, and a slim barrel for more precise groups. After
all tooling is completed, the barrel is re-checked for proper weight.
Darts are normally coated by painting or baking the barrel surface.
Widows are vapor coated in high heat furnaces that
fuse mixtures of titanium/tantalum nitride and titanium carbide
to the tungsten barrel. These durable coatings, available in black
or gold, provide unsurpassed gripping qualities and a startling
Ringed or Knurled models.
Four high tensile strength wires are anchored in an aluminum base
and covered with heat shrunk rubber to form a firm hold on the
A rough black oxide coating is applied to the point to increase
friction and prevent softly thrown darts from falling out.
shafts used on all MP models.